IP3​X IEC61032 Figure 3 Test Rod Probe C IEC Test Equipment

Place of Origin: China
Brand Name: SHC
Certification: CNAS、TUV、ITS、CSA、BV、SGS (cost additional)
Model Number: SC-F3C
Payment & Shipping Terms:
Minimum Order Quantity: 1 unit
Price: USD50-400 unit
Packaging Details: Aluminum toolbox
Delivery Time: 5-8 work days
Supply Ability: 999 units per month

You can make an inquiry about this product.
Your e-mail will not be leaked.

Standards:IEC61032 Figure 3Warranty:12 Months
Material:Stainless Steel And NylonDam-sphere Diameter:S 35±0.2mm
Test Probe Diameter:2.5+0.05 MmHandle Length:10mm
Test Probe Length:100±0.2mmForce:3N
High Light:IP3​X IEC Test Equipment ,  IEC61032 IEC Test Equipment ,  10mm Test Rod Probe C

IEC60529 IP3​X Test Rod Probe C IEC61032 Figure 3 ingress protection test equipment

Main specification and corresponding technical parameters:

Parameters /ModelSC-F3CSC-F3C-F
NameTest rod probe CTest rod probe C with force
1Ф2.5+0.05 0Ф2.5+0.05 0
6—-3N force

Product information:

This probe conforms to standard requirements of IEC61032 test probe C and IEC60529 for IP3X and IEC60065.

This rod probe is intended to verify the protection of persons against access to hazardous parts.

It is also used to verify the protection against access with a tool.


It can be used for anti-electric shock test when equipped with amphenol connector. Or used for enclosure protection test when open threaded hole of M6 at the end of the handle (connected with pull and push dynamometer) .The probe whose model number is with “T” is with force.

IP3​X IEC61032 Figure 3 Test Rod Probe C IEC Test Equipment 0
IP3​X IEC61032 Figure 3 Test Rod Probe C IEC Test Equipment 1