Vitreous And Porcelain Enamels Pistol Impact Test Apparatus
- PRODUCT DETAIL
| Usage: | Impact Testing Machine | Function: | Impact Test |
|---|---|---|---|
| Test Object: | Vitreous And Porcelain Enamels | Reference Standard: | ISO 4532 |
| Impact Energy: | 0~90N/cm | Scale: | 2N/cm |
| Material: | Stainless Steel | Release Mode: | Manual |
| High Light: | ISO 4532 CNAS Impact Test Apparatus , CNAS Impact Test Apparatus , CNAS impact testing equipment |
Vitreous And Porcelain Enamels Pistol Impact Test Apparatus ISO 4532
Parameters:
| Test object | vitreous and porcelain enamels |
| Reference standard | ISO 4532 |
| Test | Impact test |
| Impact energy | 0~90N/cm |
| Scale | 2N/cm |
| Material | Stainless steel |
| Release mode | manual |
| Color | silver |
Confirms:
ISO4532, DIN ISO4532 (DIN51 155), ISO4586-2, SO438-2, EN438-2:2016 Clause 20.3.
Product details:
This tester is for the pistol test of vitreous and porcelain enamels in accordance with the standard requirement of ISO 4532.
It is used to judge the impact resistance of the vitreous and porcelain enamels.
As the below picture shown, this test apparatus is made up with a striking bolt with a 5 mm steel ball tip which is shot once against the surface under test by means of a pressure spring (100 mm long, unloaded)
This device is a portable handheld apparatus which can be stored in any suitcase.
Thus avoid the inconvenience of disassembly and transportation.
It can be used outside of the laboratory and workshop.
It is suitable for factory production management testing.
This mechanical equipment can be continuously adjusted from 0~90 N/cm.
And the minimum speed can be adjusted precisely to 0.5 N/cm.
Combined with custom design A-frame, this device is not only for the test of the samples’ surface but also for the samples’ edge.
